Comfort sits where Cypress Creek meets the Guadalupe, with town homes on the local water district and ranch land on private wells. Both run hard.
The ground under Comfort is Hill Country limestone, and the water that passes through it carries a heavy load of calcium and magnesium. That is the scale on your faucets, the film on your glassware and the crust inside your water heater.
Homes in town are served by the local water district. That water is treated for safety, but treatment does not remove hardness, so it still scales everything it touches.
Outside town, most ranches and rural homes depend on their own well into the Trinity aquifer. That water arrives untreated, and alongside the hardness it can bring iron, sediment and sulfur.
Everything we do is available across Comfort, Center Point, Waring, Sisterdale and the rest of western Kendall County.
Ion-exchange softening sized to your hardness reading, for city and well supplies.
Iron, sulfur, sediment, bacteria and pH, the pre-treatment a well needs.
Carbon and sediment stages for chlorine, taste, odor and grit at every tap.
Comfort has some of the oldest homes in the Hill Country, and a lot of them still run on older plumbing. Hard water speeds up scale inside pipes and fixtures, and once it builds up it narrows lines and shortens the life of water heaters.
A whole house softener stops new scale at the point where water enters the house. Paired with sediment filtration on a well, it protects the plumbing you have rather than forcing you to replace it.
We have been testing and treating water in this part of Texas since 1989, and we answer the phone ourselves.
Family-owned, locally operated, and still on the same phone number after thirty-six years.
Class 3 certified by the Texas Water Commission and licensed by the Water Quality Association.
We supply the equipment and install it ourselves, with one written price that covers the whole system.
Softening, filtration and drinking water designed as one system for every tap, shower and appliance.
We test at your property, explain the numbers and put the recommendation in writing, at no charge.
Capacity and stages chosen from your test result, not from a regional average or a catalogue page.
If you are close to Comfort and not listed, call anyway. We probably cover you.
Kendall County, city water and Trinity wells.
Kerr County and the upper Guadalupe.
Gillespie County, city water and ranch wells.
Yes. The district supply and private wells around Comfort both test hard. A free test gives you your exact number.
Usually yes. Water treatment makes water safe, not soft. Hardness passes straight through to your tap.
Hardness, iron, pH, sediment and bacteria at a minimum. Trinity wells vary a lot between properties, so we test before recommending anything.
It stops new scale from forming, which protects pipes, fixtures and the water heater from here on. It will not undo heavy scale that is already there.
Yes, along with the rest of western Kendall County and into Kerr County.
It depends on your water and your household size. After the free test you get a firm written price for the complete system, installed.
Comfort sits on limestone, and limestone makes hard water. That is true on the district supply and on private wells.
Comfort has two kinds of household water. Homes in town on the district system, and ranch land on private Trinity wells.
On district water the job is usually straightforward. A correctly sized softener, and carbon filtration if taste bothers you.
On a well the order of treatment matters. Sediment first, then iron and sulfur, then softening, then UV if bacteria shows up.
Older homes benefit most. Stopping scale protects plumbing and water heaters that would be expensive to replace.
We have served Comfort and the Kendall County area since 1989. We supply the equipment and install it ourselves, as one job with one written price.
A whole house system treats every tap. Showers, laundry, the water heater and the kitchen all get the same treated water.
Testing is free and carries no obligation. Some visits end with us telling you a smaller system will do the job.
| Comfort supply | Common issue | What we usually fit |
|---|---|---|
| District water | Scale and spotting | Correctly sized ion-exchange softener |
| District water | Chlorine taste and smell | Whole-house carbon filtration |
| Ranch well | Orange staining from iron | Iron filter ahead of the softener |
| Ranch well | Rotten egg smell | Aeration or catalytic carbon |
| Ranch well | Cloudy after rain | Sediment pre-filtration |
| Any supply | Flat drinking water | Reverse osmosis at the kitchen tap |
Is Comfort water hard? Yes. Both the district supply and private wells around Comfort test hard.
Do I need a softener on district water? Usually yes. Water treatment makes water safe, not soft.
Is my well water treated? No. Private wells are unregulated and untreated. Testing comes before any equipment.
Do you cover western Kendall County? Yes, Comfort, Center Point, Waring, Sisterdale and the surrounding area.
Comfort grew up at the meeting of Cypress Creek and the Guadalupe River, and a lot of the land around it is still ranch country where a private well is the only water source.
The Trinity aquifer is the main groundwater source here. Water moving through its limestone dissolves calcium and magnesium, which is exactly what hardness is.
Iron is a common finding on area wells. It shows up as orange staining and has to come out before the softener, not after.
Sulfur is less common but hard to miss. Hydrogen sulfide gives water a rotten egg smell and passes straight through a softener untouched.
Sediment tends to show up after heavy rain. A sediment stage at the front of the system protects the equipment after it.
Our advice for anyone in Comfort is simple. Find out where your water comes from, get it tested, and size the system from the numbers.
Check any of this against the primary sources:
Free on-site testing across Comfort, Center Point, Waring, Sisterdale and western Kendall County.